Grand Caravan AWD V6-3.8L VIN L (2001)
Wheel Cover: Service and Repair
WHEEL COVER
REMOVAL
1. Noting the location of the valve stem in relationship to the wheel mounting nuts, remove the three wheel mounting nuts securing the wheel cover to
the wheel and hub.
CAUTION: When removing the wheel cover, do not pry the wheel cover from the wheel. This can result in damage to the wheel cover. The wheel
cover is removed by pulling it off the wheel by hand.
2. Grasp the wheel cover at the edges in line with the remaining installed wheel nuts and pull straight outward from the wheel. This will pop the
wheel cover retaining tabs over the two remaining wheel nuts, removing the wheel cover from the wheel.
INSTALLATION
NOTE: Wheel mounting nuts must be installed on the studs as shown to allow installation of the wheel cover.
1. Place the wheel cover on the wheel in the following fashion:
a. Align the valve notch in the wheel cover with the valve stem on the wheel.