dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ignition Off-Draw (IOD) Fuse <--> [Power Interrupt Connector/Switch]|Description and Operation|Page 5730 > < Ignition Off-Draw (IOD) Fuse <--> [Power Interrupt Connector/Switch]|Description and Operation|Page 5728
Page 2
background image

now safe to select the lowest milliampere scale of the multi-meter to check the low-amperage IOD.

CAUTION:  Do not open any doors, or turn ON any electrical accessories with the lowest milliampere scale selected, or the multi-meter may be
damaged.

5. Observe the multi-meter reading. The low-amperage IOD should not exceed thirty-five milliamperes (0.035 ampere). If the current draw

exceeds thirty-five milliamperes, isolate each circuit using the fuse and circuit breaker remove-and-replace process in Step 4.The multi-meter
reading will drop to within the acceptable limit when the source of the excessive current draw is disconnected. Repair this circuit as required;
whether a wiring short, incorrect switch adjustment, or a component failure is at fault.

Ignition Off-Draw (IOD) Fuse <--> [Power Interrupt Connector/Switch]|Description and Operation|Page 5730 > < Ignition Off-Draw (IOD) Fuse <--> [Power Interrupt Connector/Switch]|Description and Operation|Page 5728