dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Specifications|Page 2978 > < Application and ID
Page 1
background image

Manifold Absolute Pressure (MAP) Sensor: Specifications

MAP Sensor Plastic Manifold ...............................................................................................................................................................1.7 Nm (15 In. Lbs.).
MAP Sensor Aluminum Manifold .........................................................................................................................................................3.3 Nm (30 In. Lbs.).

The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the
specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws
available for repair. They require a higher torque than the original screws..

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Specifications|Page 2978 > < Application and ID