Grand Caravan AWD V6-3.8L VIN L (2001)
6. Remove the pressure hose routing bracket bolt.
7. lower the vehicle.
8. Remove cap from power steering fluid reservoir.
9. Using a siphon pump, remove as much power steering fluid as possible from the power steering fluid reservoir.
10. Disconnect the fluid supply hose from the pump
11. Disconnect the pressure hose from the pump
12. Remove the mounting bolt from the rear of the pump using care not to lose the spacer between the pump and bracket.
13. Remove the three front mounting bolts through the pulley
14. Remove the pump through the engine compartment rocking it over the aluminum bracket.
INSTALLATION
1. Install power steering pump back in vehicle using the reverse order of its removal through the engine compartment of the vehicle.
2. Install the power steering pump on its mounting bracket.
3. Install the 3 front and 1 rear power steering pump mounting bolts. Remember to place spacer between pump and rear mounting bracket when
installing rear mounting bolt. Tighten the power steering pump mounting bolts to a torque of 54 Nm (40 ft. lbs.).