Grand Caravan AWD V6-3.8L VIN L (2001)
17. If the disc brake caliper adapter and hub/bearing were removed as an assembly from the axle and the hub/bearing cannot be removed from the
adapter by hand, use the following procedure to remove it from the adapter. With a helper supporting the caliper adapter in his hands, position
Remover, Special Tool 8214-1 on the cast housing of hub/bearing. Do not position special tool on inner race of hub/bearing. Lightly strike
Remover, Special Tool 8214-1 with a hammer to remove the hub/bearing from the caliper adapter.
INSTALLATION
1. Install hub/bearing on end of axle..
