Grand Caravan AWD V6-3.8L VIN L (2001)
2. Remove transaxle oil pan and drain fluid (Fig. 111) (Fig. 112).
3. Loosen band adjusting screw locknut 5 - 6 turns. Be sure adjusting screw turns freely in lever.
4. Tighten adjusting screw to 5 Nm (41 inch lbs.) (Fig. 113).
5. Back off adjusting screw 3 turns.
6. Hold adjusting screw in place and tighten locknut to 14 Nm (125 ft. lbs.) torque.
7. Install a bead of Mopar Silicone Rubber Adhesive Sealant to the oil pan and install to case immediately.
8. Install oil pan-to-case bolts and torque to 19 Nm (165 inch lbs.).
9. Lower vehicle and refill transmission with Mopar ATF Plus 4, Type 9602, fluid.
