dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission Cooler Replacement|Page 4491 > < Mechanical Specifications|Page 4488
Page 1
background image

Transmission Cooler: Service and Repair
Transmission Cooler Replacement

REMOVAL 

1. Remove the radiator. 

2. Disconnect lines from oil cooler (Fig. 2).

3. Remove oil cooler attaching screws (Fig. 3).
4. Remove the oil cooler.

INSTALLATION 

1. Install transaxle oil cooler and mounting screws (Fig. 3).

NOTE:  When replacing the transmission oil cooler, the cooler hoses must be replaced.

2. Connect the new cooler hoses and install clamps (Fig. 2).
3. Install the radiator. 
4. Start engine. Check and adjust the fluid level as necessary.

Transmission Cooler Replacement|Page 4491 > < Mechanical Specifications|Page 4488