Grand Caravan FWD L4-2.4L VIN B (1997)
4.
Replace the lock actuator grommet (Fig. 1), with the one included in kit p/n 05072507AA.
5.
Install the 0-ring from kit p/n 05072507AA, over the lock lever tab and against the actuator grommet as shown in (Fig. 1).
6.
Test by performing an unlock - lock - lock cycle, repeat the cycle three times. No chatter should be heard from the actuator and the plunger should
remain held under the lock lever during and after actuation.
7.
Install the latch/lock control cover.
8.
Install the water shield.
9.
Install the sliding door interior trim panel.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
