Grand Caravan FWD L4-2.4L VIN B (1997)
Battery Tray Mounting Locations
12. Install the battery tray in the vehicle. Install the 2 bolts and the nut attaching the battery tray to the vehicle. Tighten the 2 bolts and the nut to a
torque of 14 Nm (10 ft. lbs.).
13. If vehicle is equipped with speed control, install the speed control servo and bracket on the battery tray. Install and securely tighten bolt attaching
bracket to battery tray.
14. If vehicle is equipped with speed control, install the wiring harness connector on the speed control servo. Then connect the vacuum lines onto the
speed control servo and vacuum reservoir on battery tray.
Air Inlet Resonator
15. Install the air inlet resonator and hoses as an assembly on the throttle body and air cleaner housing. Securely tighten the hose clamp at the air
cleaner housing and throttle body.
16. Install the battery and the battery thermal guard.
17. Install the battery cables on the battery.
18. Check the operation of the stop lamp switch and adjust if necessary.
