Grand Caravan FWD L4-2.4L VIN B (1997)
5. End play travel: 0.05 - 0.15 mm (0.002 - 0.010 inch).
6. If end play is excessive check cylinder head and camshaft for wear; replace as necessary.
CAUTION: Ensure that NONE of the pistons are at top dead center when installing the camshafts.
INSTALLATION
1. Remove camshaft retaining caps and lubricate bearing journals. Install cam followers and camshafts with clean oil. Install right and left camshaft
bearing caps #2 thru #5 and right #6. Tighten M6 fasteners to 12 Nm (105 inch lbs.) in sequence shown.
2. Apply Mopar Gasket Maker, or equivalent to No. 1 and No. 6 bearing caps. Install bearing caps and tighten M8 fasteners to 28 Nm (250 inch lbs.)
.
3. Bearing end caps must be installed before seals can be installed.
4. Install timing belt, sprockets and covers.
5. Install cylinder head cover.
