dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Mount|Page 1957 > < Front Mount
Page 1
background image

Engine Mount: Service and Repair
Left Mount

REMOVAL 

1. Raise vehicle on hoist and remove left front wheel.
2. Support the transmission with a transmission jack.
3. Remove the insulator through bolt from the mount.
4. Remove the transmission mount fasteners and remove mount.

INSTALLATION 

1. Reverse removal procedure for installation.
2. Tighten mount to transmission bolts to 55 Nm (40 ft. lbs.).
3. Tighten through bolt to 75 Nm (55 ft. lbs.).
4. Engine mount adjustment, Refer to Adjustment.

Front Mount|Page 1957 > < Front Mount