Grand Caravan FWD L4-2.4L VIN B (1997)
Knock Sensor: Service and Repair
Fig 14 Knock Sensor
The knock sensor threads into the side of the cylinder block in front of the starter (Fig. 14).
REMOVAL
1. Disconnect electrical connector from knock sensor.
2. Use a crow foot socket to remove the knock sensors.
INSTALLATION
1. Install knock sensor. Tighten knock sensor to 10 Nm (7 ft lb) torque.
CAUTION: Over or under tightening effects knock sensor performance, possibly causing improper spark control.
2. Attach electrical connector to knock sensor.
