Grand Caravan FWD L4-2.4L VIN B (1997)
30. Install underdrive shaft assembly.
31. Install No. 3 thrust washer.
32. Stick No. 3 thrust plate onto overdrive shaft assembly with dabs of petrolatum.
33. Install overdrive shaft assembly. Now that both shaft assemblies and thrust washers are properly installed, reinstall overdrive clutch and reverse
clutch as shown in steps 19 - 26. Rechecking these clutch clearances is not necessary, as they were set and approved previously.
34. Reassembly of input clutch assembly is now complete.