Grand Caravan FWD V6-181 3.0L SOHC (1993)
Fig. 10 Dust Boot Removal
7. Support caliper and remove dust boot and discard.
Removing Piston Seal From Caliper
8. Using a plastic trim stick, work piston seal out of its groove in piston bore. Discard old seal. Do not use a screwdriver or other metal tool for this
operation, because of possibility of scratching piston bore or burring edges of seal groove.
Bushing and Sleeve Assembly Service
NOTE: The bushing and sleeve assembly is a sealed for life unit. To service this unit:
