dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Diagnosis & Testing|Page 2429 > < Diagram Information and Instructions|Page 2426
Page 1
background image

Radiator Cooling Fan Motor: Testing and Inspection
Component Diagnosis & Testing

ELECTRIC FAN MOTOR

1. Disconnect fan motor electrical connector.
2. Connect jumper wire to positive side of fan motor connector.
3. Fan should operate properly; if not, replace fan motor.
4. If fan is noticeably overheated, system voltage may be too high. Inspect charging system as necessary.

Refer to Cooling System / Testing and Inspection / Procedures / Diagnostic Charts for further Diagnosis.  

Component Diagnosis & Testing|Page 2429 > < Diagram Information and Instructions|Page 2426