Grand Caravan FWD V6-181 3.0L SOHC (1993)
Engine Mount: Service and Repair
Rubber Insulators
Insulator location on yoke bracket to engine plate (right side) and two-piece slider tube (left side) are adjustable to allow right/left drive train adjustment
in relation to driveshaft assembly length.
Check and reposition right and left engine mount insulators as required. Care must be taken to ensure that the left engine mount through bolt is engaged
into the weldnut, but not torqued before attempting to center the engine. Adjust drive train position, if required, for the following conditions:
^
Driveshaft distress.
^
Any front end structural damage (after repair).
^
Insulator replacement.