Grand Caravan FWD V6-181 3.0L SOHC (1993)
Oil Filter: Service and Repair
1. Check the oil filter mounting surface. The surface must be smooth, flat and free of debris or old pieces of rubber.
2. Check adaptor for cracks and oil leaks.
CAUTION: When servicing the oil filter avoid deforming the filter. Install the remove/install tool band strap against the can-to-base lock seam. The
lock seam joining the can-to-base is reinforced by the base plate.
3. Using Tool C-4065, or equivalent, turn filter counterclockwise to remove from base. Properly discard filter.
4. Wipe base clean, then inspect gasket contact surface.
5. Lubricate gasket of new filter with clean engine oil.
6. Install new filter until gasket contacts base. Tighten filter 1 turn or 20 Nm (15 ft. lbs.). Use filter wrench if necessary.
7. Start engine and check for leaks.
