dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor|Locations > < Ignition Hall Effect Sensor|Locations|Page 2879
Page 1
background image

Manifold Pressure/Vacuum Sensor: Specifications

Vacuum in Inches of Mercury  

 MAP sensor Signal Voltage

  .39 in Hg  ............................................................................................................................................................................  4.90 V          

 3.34 in Hg  ...........................................................................................................................................................................  4.60 V          

 6.30 in Hg  ...........................................................................................................................................................................  3.60 V          

 9.25 in Hg  ...........................................................................................................................................................................  3.10 V          

12.20 in Hg  ..........................................................................................................................................................................  2.60 V          

15.15 in Hg  ..........................................................................................................................................................................  2.10 V          

18.11 in Hg  ..........................................................................................................................................................................  1.60 V          

21.06 in Hg  ..........................................................................................................................................................................  1.10 V          

24.01 in Hg  ...........................................................................................................................................................................   .60 V          

26.97 in Hg  ...........................................................................................................................................................................   .31 V          

 

Condition ............................................................................................................................................................................... Expected Output Voltage 

 

High Vacuum (Idle/Deceleration) ............................................................................................................................................................. 0.5 to 1.5 volts  

 

Medium Vacuum (Cruise/Slight Acceleration) ......................................................................................................................................... 1.5 to 3.0 volts  

 

Low Vacuum (Hard Acceleration/Mechanical Failure) ............................................................................................................................. 3.0 to 4.5 volts  

 
NOTE:  Any reading of 0 volts or over 5 volts indicates a problem in the MAP sensor circuit. 

Manifold Pressure/Vacuum Sensor|Locations > < Ignition Hall Effect Sensor|Locations|Page 2879