dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Other Service Bulletins for Wheel Speed Sensor: > < ABS - Warning Lamp ON
Page 2
background image

PARTS REQUIRED:

REPAIR PROCEDURE:

This bulletin involves replacing ** all ** ABS wheel speed sensors with identification number "BNA-2" molded oh the side of the wiring connector.

1.

** Inspect the remaining ABS wheel speed sensors for identification number "BNA-2" molded on the side of the wiring connector. **

2.

Using the procedures outlined on pages 5-95, 5-96 and 5-97 of the 1993 Front Wheel Drive/All Wheel Drive Service Manual (Publication Number
81-370-3105), replace ** all of the ABS wheel speed sensors on the vehicle that have the identification number "BNA-2" molded on the side of
the wiring connector. **

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.

08-14-18-94

Inspect All Four Sensors

0.6 Hrs.

08-14-18-95

Replace One Or Both Front Sensors

0.2 hrs.

08-14-18-96

Replace One Or Both Rear Sensors

0.4 hrs.

FAILURE CODE: 18 - Circuit Open

All Other Service Bulletins for Wheel Speed Sensor: > < ABS - Warning Lamp ON