dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T - 31TH, Harsh 2-3 Upshifts/3-2 Gear Kickdown|Page 4642 > < A/T - Slips In Reverse At Low Temperature|Page 4637
Page 1
background image

Band Apply Servo: Customer Interest
A/T - 31TH, Harsh 2-3 Upshifts/3-2 Gear Kickdown

NO: 21-17-95

GROUP: Transmission

DATE: Sep. 29, 1995

SUBJECT:
Transmission Shift Quality
Improvement - 31TH Transaxle

MODELS:
1990 - 1995 (AS) Town & Country/Caravan/Voyager

NOTE

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH 3.0L ENGINES AND 31TH AUTOMATIC TRANSMISSION.

SYMPTOM/CONDITION:

Harsh 2-3 upshifts, harsh 3-2 kickdown, harsh 1-2 upshifts and/or neutral to reverse shifts.

DIAGNOSIS:

Using the Mopar Diagnostic System or the Scan Tool (DRB III) with the appropriate diagnostic procedure manual, verify that all engine systems are
functioning as designed. If Diagnostic Trouble Codes (DTC's) are present, record them on the repair order for future reference and repair as necessary. If
no codes are present and all systems are functioning correctly, proceed with the following repair.

Check transaxle fluid level, throttle pressure linkage and shift linkage for proper function and operation. If the fluid level is correct and the linkages are
operating correctly, perform the Repair Procedure.

PARTS REQUIRED:

1

4612923

Spring, Throttle Pressure Linkage Return

1

4612931

Lever, Transmission Throttle Pressure

1

4612843

Rod, Transmission Throttle Pressure

1

6026776

Clip, Linkage To Throttle Body Stud

1

4269649

Filter, Transaxle Oil

1

4773546

Package, Transmission Shift Improvement

Consists Of:

1

4659331

Kickdown Spring

1

4659332

Accumulator Spring

1

4659179

Low/Reverse Servo Assembly

1

3743650

Accumulator Piston

REPAIR PROCEDURE:

This repair involves the replacement of the kickdown servo spring, accumulator spring, reverse servo cushion spring, the accumulator piston, throttle
pressure linkage rod, transmission lever and return spring with revised parts.

1.

Record the radio station presets and disconnect the battery cables.

2.

Remove the battery and battery tray assembly.

A/T - 31TH, Harsh 2-3 Upshifts/3-2 Gear Kickdown|Page 4642 > < A/T - Slips In Reverse At Low Temperature|Page 4637