dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3252 > < Diagram Information and Instructions|Page 3250
Page 2
background image

Fig 31  Battery Clamp

4. Remove nut and clamp holding battery to battery tray (Fig. 31).
5. Remove battery from vehicle.

Fig 32  PDC Rear Bracket

6. Rotate PDC toward center of vehicle to remove from rear bracket (Fig. 32).
7. Pull PDC rearward to remove from front bracket. Lay PDC aside to allow access to Powertrain Control Module (PCM).

Diagram Information and Instructions|Page 3252 > < Diagram Information and Instructions|Page 3250