Grand Caravan FWD V6-201 3.3L VIN R MFI (1998)
Alignment: Service and Repair
Front Alignment
1. Prepare vehicle as described in the Pre-Alignment Vehicle Inspection procedure.
2. Center steering wheel and lock in place using a steering wheel clamp.
CAUTION: Do not twist front inner tie rod to steering gear rubber boots during front wheel Toe adjustment.
3. Loosen front inner to outer tie rod end jam nuts. Grasp inner tie rods at serrations and rotate inner tie rods of steering gear to set front Toe to the
preferred Toe specification.
4. Tighten tie rod jam nuts to 75 Nm (55 ft. lbs.) torque.
5. Adjust steering gear to tie rod boots at tie rod.
6. Remove steering wheel clamp.
