dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Steering Pump Flow Control Valve Seal Replacement|Page 6601 > < Power Steering Pump Flow Control Valve Seal Replacement|Page 6599
Page 4
background image

7. Move the exhaust system as far rearward and to the left side of the vehicle as possible.

8. Raise the heat sleeve on the power steering hoses to expose the hose to steel tube connection. Remove the hose from the power steering fluid

return line on the front suspension cradle. Allow the remaining power steering fluid to drain from the pump and fluid reservoir through the
removed return hose.

9. Remove the accessory drive splash shield.

10. Remove the serpentine accessory drive belt from the engine. Refer to Engine.

Power Steering Pump Flow Control Valve Seal Replacement|Page 6601 > < Power Steering Pump Flow Control Valve Seal Replacement|Page 6599