Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Brake Hose/Line: Service Precautions
CAUTION: Only double wall 4.75mm (3/16 inches) steel tubing with Al-rich/ZW-AC alloy coating and the correct tube nuts are to be used for
replacement of a hydraulic brake tube.
NOTE: On vehicles equipped with traction control, the primary and secondary hydraulic tubes between the master cylinder and the hydraulic control
unit are 6 mm (15/64 inches). These tubes are also coated with the Al-rich/ZW-AC alloy and must be replaced with tubes having the same
anti-corrosion coating. Be sure the correct tube nuts are used for the replacement of these hydraulic brake tubes.
CAUTION: When installing flex hoses on the vehicle, the correct fasteners must be used to attach the routing clips or hoses to the front suspension
cradle. The fasteners used to attach components to the front suspension cradle have an anti-corrosion coating due to the suspension cradle being made of
aluminum. Only Mopar replacement fasteners with the required anti-corrosion coating are to be used if a replacement fastener is required when installing
a brake chassis line or flex hose.