Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Temperature Gauge: Initial Inspection and Diagnostic Overview
About Diagnostic Procedures
These vehicle instrument clusters are equipped with a self diagnostic test feature to help identify electronic problems. Prior to any test, perform the Self
Diagnostic Test, found under Cluster Diagnostics/Calibration at the Instrument Panel System level Testing and Inspection. See: Instrument Panel,
Gauges and Warning Indicators/Testing and Inspection
The self diagnostic system monitors the CCD bus messages. If an electronic problem occurs, a Diagnostic Trouble Code (DTC) will be displayed in the
odometer window of the cluster.
The following CCD bus messages are continuously monitored by the diagnostic system:
-
Body Control Module
-
Powertrain Control Module
-
Transmission Control Module, if equipped
NOTE: Additional diagnostic information can be found at Body Control Module, Testing and Inspection, Diagnostic Charts. See: Body and
Frame/Body Control Systems/Body Control Module/Testing and Inspection
General Information
At idle with Air Conditioning off the temperature gauge will rise slowly to about 5/8 gauge travel, the fan will come on and the gauge will quickly drop
to about 1/2 gauge travel. This is normal.
Additional diagnostic information can be found at Body Control Module, Testing and Inspection, Diagnostic Charts. See: Body and Frame/Body
Control Systems/Body Control Module/Testing and Inspection
Please also note that Instrument Panel Calibration can be found at Cluster Diagnostics/Calibration Under Testing and Inspection at the system level.
See: Instrument Panel, Gauges and Warning Indicators/Testing and Inspection