Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
4.
Remove the oil pan and gasket.
5.
Rotate the crankshaft so the number 1 (forward) counterweight and number 6 (rear) rod journal boss is facing downward (Figure 3).
6.
The forward counter weight will have either a casting parting line or a 15/16 inch drilled hole where the parting line is located (Figure 4).
7.
If there is no hole, make a scribe mark 1 inch to each side of the parting line across the counterweight face. If there is a hole, make a scribe mark