Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Fig. 19 Timing Case Cover Gasket & O-rings
3. Install a new cover gasket and new O-rings, Fig. 19.
4. Rotate crankshaft so oil pump drive flats are vertical.
5. Position oil pump inner rotor so mating flats are in same position as crankshaft drive flats, Fig. 19.
6. Install cover onto crankshaft. Ensure oil pump is correctly engaged on crankshaft or severe damage may result.
7. Install chain case cover screws and tighten to specifications.
8. Install crankshaft oil seal as follows:
a. Position seal into opening with seal spring towards inside of engine.
Fig. 20 Crankcase Oil Seal Installation
b. Install seal until flush with cover using seal crankshaft seal installing tool No. C-4992, or equivalent, Fig. 20.