Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Fig. 21 Crankshaft Pulley Installation
9. Install crankshaft pulley using thrust bearing/washer plate tool No. L-4524, or equivalent and a 5.9 inch screw, Fig. 21. Tighten crankshaft pulley
bolt to specifications.
10. Install engine bracket, Fig. 14 and tighten attaching screws to specifications.
11. Install idler pulley on engine bracket.
12. Install cam sensor.
13. Install A/C compressor mounting bracket, then A/C compressor.
14. Install accessory drive belt.
15. Install right front inner splash shield, then wheel and tire assembly.
16. Install oil pump pickup, oil pan and transaxle inspection cover, if removed.
17. Install engine mount.
18. Fill crankcase with oil to proper level.
19. Fill cooling system.
20. Connect battery ground cable.