Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
DIAGNOSIS:
Visually inspect the serpentine belt and idler pulley to determine it mis-alignment exists (If the serpentine belt is off the pulleys install the serpentine
belt). Start the engine and let it run for one minute before checking alignment). The belt should be approximately 2mm (0.08 in.) from the inboard edge
of the idler pulley (Figure 1) when alignment is correct and this bulletin does not apply. If the belt and pulley appear as in Figure 2, perform the Repair
Procedure.
PARTS REQUIRED:
1
04612412
Bracket, Engine Mount
AR (1)
04861322
Belt, Serpentine
REPAIR PROCEDURE:
THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND DOES NOT REQUIRE HOISTS OR
OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT.