Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Front Wheel Speed Sensor Attaching Bolt
5. Remove the wheel speed sensor head to steering knuckle attaching bolt.
6. Remove sensor head from steering knuckle. If the sensor has seized due to corrosion, DO NOT USE PLIERS ON SENSOR HEAD. Use a hammer
and a punch and tap edge of sensor ear, rocking the sensor side to side until free.
7. Remove the wheel speed sensor cable grommets from the retaining bracket.
8. Remove front wheel speed sensor assembly from the vehicle.
Installation
PROCEDURE
CAUTION: Proper installation of wheel speed sensor cables is critical to continued system operation. Be sure that cables are installed in retainers.
Failure to install cables in retainers as in this section may result in contact with moving parts and/or over extension of cables, resulting in an open
circuit.