dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tools and Equipment > < Power Steering Pump Flow Control Valve Replacement|Page 7530
Page 5
background image

11. Remove the power steering fluid supply hose coming from the remote fluid reservoir, from the fitting on the power steering pump. Drain off excess

power steering fluid from hose.

12. Remove the power steering fluid pressure line from the power steering pump. Drain excess power steering fluid from tube.
13. Remove the power steering fluid return hose from the power steering pump. Drain excess power steering fluid from tube.

14. Remove the support bracket at the rear of the power steering pump attaching the pump to the rear of the engine.

15. Remove the 3 bolts mounting the power steering pump to the alternator/power steering pump and belt tensioner mounting bracket.
16. Remove the power steering pump from its mounting bracket.
17. The power steering pump is removed from the vehicle by pulling it out through the exhaust tunnel area in the floor pan of the vehicle.

Tools and Equipment > < Power Steering Pump Flow Control Valve Replacement|Page 7530