dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Axle Shaft|Removal|Page 5570 > < Axle Shaft|Removal|Page 5568
Page 2
background image

7. Install the steering knuckle to ball joint stud castle nut. Tighten the castle nut to 95 Nm (70 ft. lbs.).

8. If equipped with antilock brakes, install the speed sensor cable on the steering knuckle and securely tighten bolt.

Axle Shaft|Removal|Page 5570 > < Axle Shaft|Removal|Page 5568