dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Inner Tripod Joint Seal Boot|Page 5586 > < Inner Tripod Joint Seal Boot|Page 5584
Page 4
background image

^

Place crimping tool C-4975-A, or equivalent over bridge of clamp.

^

Tighten nut on crimping tool C-4975-A, or equivalent until jaws on tool are closed completely together, face to face.

Latching Type Boot Clamp 
If seal boot uses low profile latching type boot clamp:
^

Clamp sealing boot onto tripod housing using clamp locking tool, Snap-On YA3050, or an equivalent.

^

Place prongs of clamp locking tool in the holes of the clamp.

Inner Tripod Joint Seal Boot|Page 5586 > < Inner Tripod Joint Seal Boot|Page 5584