Grand Caravan FWD V6-3.0L VIN 3 (1999)
32.
With the help of an assistant, place each of the seats into the vehicle and connect the seat harness connector to the vehicle harness (Figure 10).
33.
Lift the vehicle on a hoist.
34.
Install the four (4) seat retaining nuts onto the seat mounting studs for each seat. Tighten the nuts to 44 ft. lbs. (60 N.m) (Figure 1).
35.
Lower the vehicle from the hoist.
36.
Connect the negative battery cable.
37.
Verify that the seat adjusters and seat heaters are functioning properly.
