Grand Caravan FWD V6-3.0L VIN 3 (1999)
24.
Place a dab of GEN II Silicone Adhesive Sealant p/n, 04883971 to each location or the heads (Figure 4).
25.
Install each rocker cover and torque the bolts to 10 Nm (88 in. lbs.).
26.
Reinstall all other removed components paying attention to any specifications listed in the service manual.
27.
Start and run the engine at 2500 rpm to bleed air from the lifters. After the air is bleed from the lifters verify the repair by repeating the diagnosis
section.
