Grand Caravan FWD V6-3.0L VIN 3 (1999)
Power Mirror Switch: Service and Repair
Power Mirror Switch
REMOVAL
Battery Negative Cable
1. Disconnect and isolate the battery negative cable.
2. Remove instrument cluster bezel. Refer to Instrument Cluster Bezel Replacement.
Power Mirror Switch
3. Disconnect wire connector from back of power mirror switch.
4. Disengage lock tabs above and below the mirror switch.
5. Pull power mirror switch from headlamp switch bezel. The power mirror switch bezel is mounted to the bottom of the instrument cluster bezel.
6. Remove power mirror switch.
INSTALLATION
For installation, reverse the above procedures.
REMOVAL AND INSTALLATION