dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Water Pump|Specifications|Page 1777 > < Water Pump|Specifications|Page 1775
Page 1
background image

Water Pump: Testing and Inspection

Replace the water pump if it has any of the following defects:
1. Damage or cracks on the pump body.
2. Coolant leaks: If the seal is leaking, this will be evident by traces of thick deposits of greenish-brown dried glycol running down the pump body

and components below. A thin black stain below pump weep hole is considered normal operation.

3. Impeller rubs inside of chain case cover or cylinder block.
4. Excessively loose or rough turning bearing.

NOTE:  It is normal for the water pump to weep a small amount of coolant from the weep hole (black stain on water pump body). Do not replace
the water pump if this condition exists. Replace the water pump if a heavy deposit or a steady flow of green/brown engine coolant is evident on
water pump body from the weep hole (shaft seal failure). Be sure to perform a thorough analysis before replacing water pump.

Water Pump|Specifications|Page 1777 > < Water Pump|Specifications|Page 1775