dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Right Side Sliding Door Trim Panel - Rubs Quarter Panel|Page 3360 > < Radio - Poor AM Reception/Ignition Noise|Page 3354
Page 1
background image

Trim Panel: All Technical Service Bulletins
Right Side Sliding Door Trim Panel - Rubs Quarter Panel

NUMBER: 23-33-99

GROUP: Body

DATE: Aug. 13, 1999

SUBJECT:
Right Side Sliding Door Trim Panel Rubs Quarter Panel

OVERVIEW:
This bulletin involves replacing the two top center sliding door trim panel clips.

MODELS:

1999 - 2000 (NS) Town & Country/Caravan/Voyager
1999 - 2000 (GS) Chrysler Voyager (International Market)

NOTE:

THIS BULLETIN APPLIES VEHICLES BUILT PRIOR TO JULY 15, 1999 (MDH 0715XX).

SYMPTOM/CONDITION:
The right side sliding door trim panel contacts the quarter panel when the door is opened because the two top center sliding door trim panel clips do not
retain the trim panel to the door tight enough.

DIAGNOSIS:
Open the right sliding door, if there is contact between the sliding door trim panel and the quarter panel, perform the Repair Procedure.

PARTS REQUIRED:

2

06505292AA

Clip, Trim Panel

AR (1)

04796237

Cleaner/Wax

EQUIPMENT REQUIRED:

Fiber Stick

REPAIR PROCEDURE:

THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND NOT REQUIRE HOISTS OR OTHER
FULL SERVICE FACILITY SPECIAL EQUIPMENT.
 
1.

Using a fiber stick remove the right side sliding door upper frame molding.

2.

Remove the three screws attaching the trim panel to the door.

3.

Disengage the clips around the perimeter of the trim panel that hold the trim panel to the door with a fiber stick.

4.

Remove the top two center clips from the trim panel and the top two center clip grommets from the door.

5.

Install the revised clips, p/n 06505292AA to the trim panel.

6.

Place the trim panel in position on the vehicle.

7.

Align the locating pins on the backside of the trim panel to the mating holes in the inner door panel.

8.

Engage the clips to hold the trim panel to the door.

9.

Install the three screws that attach the trim panel to the door.

10.

Install the upper frame molding.

11.

If the paint is scuffed use Mopar Cleaner/Wax, p/n 04796237, to polish the paint.

Right Side Sliding Door Trim Panel - Rubs Quarter Panel|Page 3360 > < Radio - Poor AM Reception/Ignition Noise|Page 3354