dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Electronic Brake Control Module > < Campaign - Seat Heater Element/Module/Wiring Replacement|Page 61
Page 1
background image

ABS Main Relay: Description and Operation

ABS FUSES

The ABS system fuse and the ABS pump/motor fuse are located in the Power Distribution Center (PDC). Refer to the sticker on the inside of the PDC
cover for the location of these fuses. The PDC is located on the driver's side of the engine compartment. The fuse for the amber ABS warning lamp is
located in the fuse junction block under the instrument panel.

If the vehicle is equipped with traction control, the fuse for the traction control switch is located in the fuse junction block under the instrument panel.

ABS RELAYS

Two relays are used to control the antilock brake system. The two relays are the pump/motor relay and the system relay. The pump/motor relay and the
system relay are located in the CAB. If either the pump/motor relay or the system relay is diagnosed as not functioning properly, the CAB must be
replaced. 

Electronic Brake Control Module > < Campaign - Seat Heater Element/Module/Wiring Replacement|Page 61