Grand Caravan FWD V6-3.0L VIN 3 (1999)
Power Window Motor Removal
-
Lift the cable guide off the motor, the drum with cables, will be lifted off simultaneously.
CAUTION: Do not allow the drum to separate from the cable guide, by dropping drum or letting the cables unwind.
INSTALLATION
1. Install the cable guide and drum into the replacement motor.
CAUTION: The drum may require a slight rotation to install onto the motor drive shaft. Rotate the drum with the use of needle nose pliers or a
similar tool. If, the drum does not align with the motor shaft by a slight rotation,then, the glass should be lowered a small amount approximately 1
to 2 inches. The drum will rotate when the glass is lowered. Lowering the glass will require assistance of a second person.
2. Install the replacement cover plate onto the replacement motor. Crimp toy tabs.
3. Connect the wiring harness to the window motor connector.
4. Remove the tape holding the window in place and test window operation.
5. Re-assemble remaining parts in reverse order as above.
