dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Door Latch|Service and Repair|Page 8430 > < Front Door Hinge|Service and Repair
Page 1
background image

Front Door Latch: Service and Repair

LATCH

REMOVAL

1. Roll door glass up.
2. Remove front door trim panel.
3. Remove watershield as necessary to gain access to the outside door handle.
4. Through access hole at rear of inner door panel, disconnect wire connector from power door lock motor, if equipped.

Fig. 18

5. Disengage clips holding linkage to door latch (Fig. 18).
6. Remove linkages from door latch.

Fig. 19

7. Remove screws attaching door latch to door end frame (Fig. 19).

Front Door Latch|Service and Repair|Page 8430 > < Front Door Hinge|Service and Repair