Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Trunk / Liftgate Interior Trim Panel: Service and Repair
TRIM PANEL
REMOVAL
Fig. 6
1. Remove the bolt attaching the lift motor link, if equipped (Fig. 6).
Fig. 7
2. Remove liftgate upper frame molding (Fig. 7).
3. Remove assist handle screws.
4. Disengage hidden clips holding trim panel to liftgate from around perimeter or liftgate (Fig. 7).
5. Disconnect wire connector from lamps.
6. Remove liftgate trim panel from vehicle.
INSTALLATION
1. Place liftgate trim panel in position on vehicle.
2. Engage hidden clips to hold trim panel to liftgate and fasteners around perimeter of liftgate (Fig. 7).
3. Connect wire connector into lamp.
4. Install courtesy lamps into liftgate trim.