Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
14. Install left quarter trim bolster.
15. Install front door sill plate on three door vehicle.
16. Install sliding door sill plate on four door vehicle.
17. Install second row seat, if equipped.
18. Install first row seat.
19. Connect the battery negative cable.
Right Quarter Trim Panel
RIGHT QUARTER TRIM PANEL
REMOVAL
CAUTION: Disconnect the battery negative cable. Damage to accessory feed circuit can result.
1. Remove first row seat.
2. Remove second row seat.
3. Remove sliding door sill trim panel.
4. Remove quarter trim bolster.
5. Remove D-pillar trim panel.
6. Remove first row seat belt anchor.
7. Remove second row seat belt anchor.
8. Remove screws attaching quarter trim to quarter panel from bolster area.
9. Remove screws attaching rear edge of quarter trim to attaching bracket.
10. Disengage hidden clips attaching front of quarter trim to quarter panel rearward of sliding door opening and at locators.
11. Remove quarter trim from quarter panel.
12. Disconnect speaker wire connector on LWB quarter trim panel with rear air conditioning.
13. Pass second row seat belt through slot in trim panel on long wheel base vehicle.
14. Pass first row seat belt through slot in trim panel.
15. Remove quarter trim panel from vehicle.
INSTALLATION
1. Position quarter trim panel on vehicle.
2. Pass first row seat belt through slot in trim panel.
3. Pass second row seat belt through access hole in trim panel on long wheel base vehicle.
4. Connect wire connector into speaker on LWB with rear air conditioning.
5. Align locating pins on backside of trim panel to mating holes in inner quarter panel.
6. Engage hidden clips attaching front of quarter trim to quarter panel rearward of sliding door opening and at locators.
7. Install screws attaching rear edge of quarter trim to attaching bracket.
8. Install screws attaching quarter trim to inner quarter panel in bolster area.
9. Install second row seat belt anchor on long wheel base vehicle. Tighten all seat belt bolts to 39 N.m (29 ft.lbs.) torque.
10. Install first row seat belt anchor.
11. Install D-pillar trim panel.
12. Install C-pillar trim panel.
13. Install quarter trim bolster.
14. Install sliding door sill trim panel.
15. Install second row seat, if equipped.
16. Install first row seat.
17. Connect the battery negative cable.
Quarter Trim Bolster
QUARTER TRIM BOLSTER
REMOVAL
The speaker grille in the quarter trim panel is not removable. The trim panel must be removed to service the speaker.
1. Disengage hidden clips attaching trim bolster to quarter trim panel.
2. Remove quarter trim panel from vehicle.
INSTALLATION
The speaker grille in the quarter trim bolster is not removable. The trim bolster must removed to service the speaker.
1. Place quarter trim bolster in position on vehicle.
2. Engage hook retainer attaching front of trim bolster to quarter trim panel, if applicable.
3. Engage hidden clips attaching trim bolster to quarter trim panel.
