Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
INSTALLATION
1. Match the replacement cable up against the old cable to verify the correct part.
2. Position the hold open latch cable on the side door.
NOTE: The hold open latch cable is marked with white tape. It must be attached to the upper most cable attachment at the latch. This position is
marked with a "W" on the latch.
3. Connect the hold open latch cable on the hold open latch assembly. Hook the swedged cable end on the latch link and gently push the cable sleeve
retainer in the latch bracket.
4. Install the hold open latch on the side door.
5. Connect the hold open latch cable on the latch assembly. Hook the swedged cable end on the latch link and gently push the cable sleeve retainer in
the latch bracket.
6. Trace the outside handle cable along its routing path and install on its retaining clips and position foam insulators. Use previously made schematic
as a guide or remove the opposite side door trim panel and use that door as a guide.
CAUTION: Be certain replacement cable is routed and retained correctly and foam insulators are properly positioned.
7. Install the latch assembly.
8. Place the watershield into position and press securely to adhesive making sure to properly route wiring and linkages.
9. Install the appropriate side door trim panel on the vehicle.
10. Connect the negative battery cable.
