Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Power Seat Motor: Service and Repair
Front Seat Track Power Adjuster
FRONT SEAT TRACK POWER ADJUSTER
REMOVAL
The power seat track and motors are serviced as an assembly.
1. Remove seat from vehicle.
2. Remove seat cushion.
3. Remove nut attaching recliner to seat back frame.
4. Remove both pivot bolts attaching seat back frame to seat track.
5. Remove seat back frame from recliner.
6. If power seat track is being replaced, transfer power recliner, wire harness and trim covers to replacement seat track.
INSTALLATION
The power seat track and motors are serviced as an assembly.
1. Install wire harness.
2. Place seat back in position.
3. Insert stud on seat back frame into recliner.
4. Install pivot bolts to hold seat back frame to seat track. Tighten bolts to 48 N.m (35 ft.lbs.)
5. Install nut attaching recliner to seat back frame. Tighten bolts to 12 N.m (105 in.lbs)
6. Install seat cushion.
7. Install seat in vehicle. Tighten fasteners to 60 N.m (44 ft.lbs.) torque.
