dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Heated Mirror Switch > < Driver Power Seat Track Replacement|Page 9356
Page 1
background image

Console Lamp Switch: Service and Repair

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Open console lid and remove tray.
3. Using a flat bladed tool, pry up on the switch.
4. Remove bulb from switch.

INSTALLATION

1. Install bulb into switch.
2. Push switch into console opening.
3. Install tray and close lid.
4. Connect battery negative cable.

Heated Mirror Switch > < Driver Power Seat Track Replacement|Page 9356