Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Fig. 7
6. Close hood. Do not latch. Remove outboard screws. (Fig. 7).
7. Disconnect washer hose in line connector.
8. Disconnect washer hose and grommet from hole in wiper module and pull out.
9. Remove cowl grille by raising over opposite wiper pivot shaft and removing away from vehicle.
10. Remove cowl cover from vehicle.
INSTALLATION
1. Reverse removal procedure.
2. When installing cowl cover over wiper module, make sure fore aft locator on the underside of cowl grill seat into the locator grooves on top of
wiper module.
3. Start all cowl grille mounting screws by hand before torquing to specifications.
4. Assure washer hose is properly routed and not pinched.
5. Center cowl grille to body and windshield.
6. Assure "arrow" indicator head of quarter turn fasteners is pointing toward windshield.
7. Tighten screw to 1.2 N.m (11 in.lbs.) torque.
8. Install the wiper arms.
9. Check for proper spray pattern from washer nozzles.
