Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
the rubber molded joint just touches the roll frame.
7. Verify that the tertiary seal is on the correct side of the roll frame prior to seating the glass run fully onto the frame. Verify the glass runs is fully
seated for the header, and A-pillar and B-pillar
8. Install screw attaching glass run weatherstrip to inner door panel.
9. Install inner belt weatherstrip.
10. Install watershed.
11. Push weatherstrip groove onto lip along top of door frame.
12. Engage clip into slot in door frame.
13. Push weatherstrip into channel at rear of door frame, working from the top to bottom.
14. Install door frame closeout moldings.
15. Install door speaker, if equipped.
16. Install door trim panel.
