Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
11.
Remove the tension clip attaching the upper return spring to the automatic adjuster assembly (Fig. 3)
12.
Remove the brake shoe to brake shoe upper return spring.
13.
Remove the trailing brake shoe assembly hold down spring and pin.
14.
Remove the trailing brake shoe assembly from the brake support plate, park brake actuating lever and the park brake actuating strut, (Fig. 4)
15.
Remove the automatic adjuster assembly from the leading shoe.
16.
Remove the leading brake shoe assembly hold down spring and pin. Remove the leading brake shoe assembly.
17.
Replace the rear brake shoes using p/n 05183395AA. Remove the park brake actuator plate from the leading brake shoe and install it to the
replacement brake shoe.
18.
Disconnect the park brake cable from the park brake actuation lever.
19.
Remove the rear wheel speed sensor if so equipped. The hub/bearing assembly cannot be removed unless the speed sensor is removed first.
CAUTION:
WHEN WORKING IN THE AREA OF THE REAR HUB/BEARING ASSEMBLY AND WHEN REMOVING IT FROM THE REAR AXLE,
CARE MUST BE USED SO THE TEETH OF THE TONE WHEEL ARE NOT DAMAGED. DAMAGE TO THE TONE WHEEL TEETH WILL
RESULT IN FALSE ABS CYCLING AND CORROSION OF THE TONE WHEEL.
