Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
13. Remove the park brake actuator from the leading brake shoe and transfer to the replacement brake shoe.
INSPECTION - REAR DRUM BRAKE SHOE LINING
1. Remove the tire and wheel assembly from the vehicle
2. Remove the rear brake adjusting hole plug found in the brake support.
3. Insert a thin screwdriver into brake adjusting hole to hold the adjusting lever away from the notches on the adjusting screw star wheel.
4. Insert Tool C-3784 into brake adjusting hole and engage notches of brake adjusting screw star wheel. Release brake by prying down with adjusting
tool.
5. Remove the rear brake drum from the rear hub and bearing assembly.
6. Inspect brake lining for wear, shoe alignment, and or contamination from grease or brake fluid.
INSTALLATION - REAR DRUM BRAKE SHOES
1. Lubricate the eight shoe contact areas on the support plate and anchor, using the required special Mopar Brake Lubricant or equivalent.
2. Install leading brake shoe on brake support plate. Install the leading brake shoe hold down spring and pin on the brake shoe.
